The Airlab is diving's
most completely integrated computer, and the only one with highly legible illuminated
alarms and a calculation of air consumption. It features the brand new Mares-Wienke
RGBM Algorithm, the first dive computer to introduce Deep Stops to make your
dives safer. Extremely sophisticated yet simple to use, all the functions are
accessible using two patented push-buttons. Airlab is powered by two standard
1.5 volt AAA alkaline batteries, which can be easily obtained anywhere in the
world, and replaced by the user. The two backlit displays are clear and legible,
even in poor visibility.
Traditional dive functions
Current depth / maximum depth achieved (using push-buttons)
Dive time
Safety stop
Remaining no-decompression time at the current depth (no
dec)
Decompression stop times
Total time to surface
Water temperature
Speed of ascent (as a percentage of the maximum permitted
speed)
CNS LIMIT for O2 exposure (in the case of Nitrox dives)
HP dive data
Tank pressure
Air consumption in liters per minute
Air time remaining at the current depth
Surface functions
Surface time
Log book for storing 50 dives in memory
Profiles of the last 50 dives, at 20-sec. intervals
Desaturation time display (desat)
Time-to-fly display (no fly)
Calendar and clock function
Air temperature
Self-diagnosis
Scrolling of no-stop times for planning repetitive dives
Dive simulator
Dive planner
Alarms
No-decompression limit reached
Excessively rapid ascent
Omitted decompression stop
Low battery
Maximum allowed depth as a function of PPO2 (for Nitrox
dives)
Suggested CNS O2 limit reached (for Nitrox dives)
Illuminated alarm signaling tank pressure at 100 bar.
Illuminated and audible alarm signaling minimum tank pressure
(default 50 bar)
Main special functions
Setting of Air/Nitrox programs
O2 percentage setting from 21% to 50% for Nitrox dives
Max PPO2 setting from 1.2 - 1.6 bar for Nitrox dives
Tank capacity setting
Option to personalize the minimum pressure permitted by
the tank (default 50 bar/725 psi)
History of total dive hours
History of the deepest dive logged, the lowest temperature
measured underwater, and the total hours of diving
Display backlight, timed or permanently illuminated (using
push-button controls)
No loss of memory during battery change
Technical characteristics
RGBM Mares-Wienke algorithm
Powered by two 1.5 volt AAA batteries
Quartz calendar clock
Maximum operating depth: 150 m / 500 feet
Maximum depth of first decompression stop: 24 m / 80 feet
Operating temperature: from -10 to +50°C (14/122 °F)
Storage temperature: from -20 to +70°C (-4/+158 °F)
WRIST
Nemo
Swiss-made case and mechanical
components offer maximum reliability and functional precision.
The RGBM Mares-Wienke Algorithm, to reduce risks associated with the formation
of micro-bubbles.
The inclusion of Deep Stops (decompression stops at greater depths) and an ascent
rate readout, both analog and digital, make dives as safe as possible.
Extremely simple and intuitive. Features easy access to all functions, both
as a watch and as a dive computer.
The only one with four dive modes: Air, Nitrox, Bottom Time, and Free-Dive (the
special freediving function), to satisfy the most demanding divers.
The watch menu includes:
Precise and convenient stopwatch with option for partial
times.
A second time setting, ideal for those who travel frequently.
Stainless
Mechanical
characteristics
Stainless steel
Version
AISI 316L stainless
steel case
Titanium Version
Titanium case
Scratch-resistant mineral glass
Steel buttons
Hypoallergenic rubber strap
Strap extension for use with dry suits
PC Interface
(optional)
IRIS. Optical via
infrared, with RS232 serial adaptor
A cutting-edge dive
computer and an elegant watch.
The best there is, in
both your worlds.
Nemo is the most complete
dive computer-watch in the world, offering all functions for dives with or without
decompression. It can also be used for Nitrox mixtures.
For freediving enthusiasts,
it also offers the special "free-dive" mode, specially designed to meet the
needs of the most demanding deep divers.
THE DIVE COMPUTER - SCUBA
Traditional
dive functions
Current depth / maximum
depth achieved (on request)
Dive time
Safety stop
Remaining no-decompression
time at the current depth (no dec)
Decompression stop
times
Total time to surface
Water temperature
Ascent rate in m/min.
(ft./min.) with digital readout
Ascent rate (as a
percentage of the maximum permitted speed)
Value for CNS O2 LIMIT
% (in the case of Nitrox dives)
Dive time in minutes
and seconds (in bottom time mode)
Surface functions
Surface time
Log book for storing
50 dives in memory
Profiles of the last
50 dives, at 20-second intervals (max. 38 hours)
Desaturation time
display (desat)
Time-to-fly display
(no fly)
Calendar and clock
function
Air temperature
Self-diagnosis
Scrolling of no-stop
times for planning repetitive dives
Alarms
No-decompression limit
reached
Excessively rapid
ascent
Omitted decompression
stop
Low battery
Max permitted depth
for the programmed PPO2 value (for Nitrox dives)
"Deep Stop" depth achieved
Main special
functions
Setting of Air/Nitrox/Bottom
time programs
Setting of percentage
O2 from 21% to 50%, in increments of 1%
Setting of PPO2
max from 1.2 to 1.6 bar
Four-level altitude
function
Option for more conservative
programs to increase safety margins
History of the total
number of dives, the deepest dive logged, the lowest temperature measured
underwater, and the total hours of diving
Timer-controlled display
lighting
No loss of memory
during battery change
Function for clearing
residual nitrogen memory
Function for disabling
audible alarms
Fresh water / seawater
setting (default fresh)
Temperature display:
Celsius (°C)/Fahrenheit (°F).
Technical characteristics
Mares-Wienke RGBM Algorithm
with Deep Stops
Powered by a CR 2430
lithium 3V battery
Quartz calendar clock
Maximum operating
depth: 150m/495 feet
Operating temperature:
from -10 to +50°C (14/122 °F)
Storage temperature:
from -20 to +70°C (-4/+158 °F)
THE DIVE COMPUTER
- FREE DIVE
During the dive
Current depth
Duration of the
dive
Water temperature
Dive time in minutes
and seconds
On the surface
Surface time
Water temperature
Maximum depth reached
during the
previous dive
Total number of dives
Dive time of the previous
dive in minutes and seconds
Main watch (upon request)
Alarms
(can be deactivated, individually if desired)
Max depth set
Max dive time set
Max surface time set
Depth intervals set
Main special
functions
History of the total
number of dives, the deepest dive logged, the lowest temperature measured
underwater, and the total hours of diving
Timer-controlled display
lighting
No loss of memory
during battery change
Fresh water / seawater
setting (default fresh)
Logbook facility for
storing 102 dive minutes in memory
Dive data organized
by sessions
Dive profiles at 4-seconds
intervals (max. 102 minutes)
THE WATCH
Quartz calendar clock
Second time setting
Precision stopwatch
with option for partial times
Outside temperature
Alarm clock
Time signal (programmable)
Timer-controlled display
lighting
M1 RGBM
The M1 RGBM is the
most complete and easy-to-use dive computer on the market, both for recreational
and technical diving. Thanks to the brand new Mares-Wienke RGBM Algorithm, the
first to introduce Deep Stops, it noticeably improves dive safety margins.
A sleek and distinctive
look, controlled by just two patented mechanical buttons.
Powered by two 1.5 Volt
AAA batteries, available everywhere.
Traditional
dive functions
Current depth / maximum depth achieved (on request)
Dive time
Safety stop
Remaining no-decompression time at the current depth (no
dec)
Decompression stop times
Total time to surface
Water temperature (on request)
Speed of ascent (as a percentage of the maximum permitted
speed)
Value for CNS O2 LIMIT % (in the case of Nitrox dives)
Dive time in minutes and seconds (in bottom time mode)
Surface functions
Surface time
Log book for storing 50 dives in memory
Profiles of the last 50 dives, at 20-sec. intervals (max
38 hours)
Desaturation time display (desat)
Time-to-fly display (no fly)
Calendar and clock function
Air temperature
Self-diagnosis
Scrolling of no-stop times for planning repetitive dives
Dive simulator
Alarms
No-decompression limit reached
Excessively rapid ascent
Omitted decompression stop
Low battery
Max permitted depth for the programmed PPO2 value (for Nitrox
dives)
Main
special functions
Setting of Air/Nitrox/Bottom time programs
Setting of percentage O2 from 21% to 50%, in increments of
1%
Setting of PPO2 max from 1.2 to 1.6 bar
History of the total number of dives, the deepest dive logged,
the lowest temperature measured underwater, and the total hours of diving
]Display backlight, timed or permanently illuminated (using
push-button controls)
No loss of memory during battery change
Function for clearing residual nitrogen memory
Function for disabling audible alarms
Fresh water / seawater setting (default fresh)
Technical Characteristics
Mares-Wienke RGBM Algorithm with Deep Stops
Powered by two 1,5 volts AAA batteries
Quartz calendar clock
Maximum operating depth: 150m/495 feet
Maximum depth of first decompression stop: 24m/80 feet
Operating temperature from -10 to +50°C (14/122 °F)
Storage temperature : from -20 to +70°C (-4/+158 °F)
M1
The same characteristics
as the M1 RGBM dive computer, with 11-tissue exponential deterministic algorithm,
with M values (low bubble) derived from studies by Rogers and Powell (modified
Haldane).